Problems with your hot water supply can severely disrupt your family’s routine, especially during the winter months. Unfortunately, this is a common problem that happens to almost every household at some point. Today, we’ll have a closer look at some of the most common causes of hot water problems, discuss what you should do if you have no hot water, and explain when to call professional plumbing service providers.

What to Do If You Suddenly Have No Hot Water

When you notice that your hot water supply has run out, check all your systems to figure out what’s going on. The more information you have, the faster the problem can be sorted out. Sometimes, you can resolve small issues with your hot water tank on your own. You might have to reset your pilot light or the high-temperature cutoff switch. However, most ongoing issues can’t be fixed without the help of a trained professional.

Check for a Gas Leak

If you have a gas water heater, the first thing to check is whether you have a gas leak. This could cause permanent problems with your hot water and also put your health at risk, so it’s important to get it fixed right away. The most obvious sign of a gas leak is a “rotten egg” smell, but small leaks sometimes don’t lead to a noticeable odor. To find out whether you have this problem, use a natural gas leak detector.

There are many options, and you can buy one at your local DIY store or online. Take action immediately if you find a gas leak. Close off all the gas valves in your home, open the windows, and get out of the immediate area. Don’t turn household appliances on or off. Instead, call your utility company immediately, and get the problem resolved as soon as possible.

Check the Gas Valve

A gas leak isn’t the only reason why your water heater might malfunction. If you haven’t found a leak, have a closer look at the valve and make sure that it is positioned correctly. Investigate the pilot light, which should be burning continuously. You might have to relight it several times. If this doesn’t work, reach out to a plumbing specialist and ask them to service your water heater.

Check Your Water Heater Tank

Your water heater tank has to be full of water to work. Although tanks are designed not to leak, they can occasionally malfunction. If there is very little or no water in your tank, it’s likely that there is a serious problem. Broken water heater tanks consume a lot of energy, and they can cause a health hazard, so they need to be repaired right away.

Check Your Electric Water Heater

Electric water heaters usually have their own dedicated circuit. If you use electricity to heat up your water and you’re experiencing issues, you might have an electrical problem. Try substituting the primary power source with an electric device that has a battery backup system. This can help you to determine whether your hot water issue is related to your electrical system. If so, you’ll need to speak to an electrician.

Check Your Thermostat

Most water heater thermostats are set to between 120 and 140 degrees Fahrenheit. If this gets damaged or malfunctions, your water heating system might shut off for safety reasons.

Check whether your high-temperature cutoff switch has tripped. You can reset it without the help of a plumber. However, it’s important to note that this shouldn’t happen regularly. If you frequently have no hot water due to a tripped high-temperature cutoff switch, reach out to a professional plumbing company and ask them to check whether there’s an issue.

Check for Sediment Accumulation

Another common problem is sediment accumulation. When deposits build up inside your tank, there is less room for water. This means that your supply is depleted much more quickly, and you might struggle to get enough hot water for your household. This leads to problems like your water becoming cold halfway through your shower.

Sediment accumulation can also lead to energy inefficiency and malodorous tap water. You can prevent this by getting your hot water system serviced at least once a year. A good plumber will remove any excess sediment and check that your water heater tank is still in good condition.

Check for Problems in the Local Area

Water heating is influenced by local weather conditions. If it’s extremely cold, your hot water tank has to work significantly harder than if the weather is mild. That’s why there is an increase in hot water issues during the winter months. A great way to eliminate this problem is to properly insulate the hot water tank.

Is My Tank Too Small? 

Have you recently expanded your family? This could be one of the reasons why you no longer have enough hot water, especially if you have a small hot water tank that isn’t designed for a sizeable household. Although a small water tank isn’t a dangerous issue, it makes your home less energy-efficient and causes problems due to the lack of hot water. The best way to resolve the problem is to replace your current tank with one that better suits your needs.

How Long Should My Hot Water Tank Last? 

Experiencing unexpected problems with your hot water can be extremely distressing. However, it’s important to remember that hot water tanks don’t last forever. The heating elements typically wear out after ten to fifteen years, so you have to get a new tank regularly. The best way to prolong the lifespan of your hot water system is to stick to a regular maintenance schedule and address small problems right away.

Do I Need Professional Plumbing Services?

Issues with your hot water supply almost always require professional attention. Because they can be so disruptive, it’s important to call someone right away. Your plumber can check your systems, make sure that all the elements are still safe, and diagnose the problem. They will let you know whether they can fix the issue or whether you need to purchase a new hot water tank.

It’s also important to remember that you need to book regular maintenance appointments to prevent future problems with your hot water system. One appointment every year is recommended. During the session, your technician will clear away sediment, check elements like the anode rod to see if they need to be replaced, and perform relevant diagnostic tests.

How to Find a Great Plumber

You can find an experienced plumber by searching online. High-quality companies like All Phase Plumbing Services provide a lot of information about what they offer and how they operate, so you can determine whether they’re a good fit for you. Always select someone with positive reviews and a comprehensive list of services. That way, you’re sure to have a good experience.

Having no hot water can be extremely disruptive. If you’re experiencing this issue, start by checking all your systems to see if you can identify the problem. Then, call a plumber and ask them for help. Get in touch with us at All Phase Plumbing Services to schedule your first appointment. We offer a wide range of professional plumbing services, so we can help you get your hot water system up and running again in no time.